Sand the surface with Sanding Paper 180 to remove loose, cracked, or flaked paint and also to eliminate dust, dirt, or grease. Wipe the surface clean.


Apply 1 coat of Athena Bio Seal Primer and allow drying for 4–6 hours.


Smoothen the surface with 2 coats of Athena Premium Coats Acrylic Wall Putty. Allow drying for 4–6 hours. Sand the surface with Sandpaper No. 180 and wipe clean.
Apply another coat of Athena Premium Coats Bio Seal Primer and allow drying for 4–6 hours.
Sand the surface with Sandpaper No. 320 or 400 and wipe clean. For best finish, ensure the surface is smooth, uniform, and free from undulations.
Thin 1 litre of Astra Luxury Emulsion with 350 ml of water.

Apply 2 coats of Astra Luxury Emulsion with a 4–6 hour gap between each coat using a short nap felt roller.

Additional Information
Drying times are based on temperatures between 28–32°C and relative humidity between 55–65% in a well-ventilated room.

This packaging is Recyclable.

Lead content does not exceed 90 parts per million.

Features
No added Mercury, Arsenic, or Chromium
Interior use
Water-based.