1. Cleaning:
Ensure the surface is clean and free from loose paint, dust, grease, or other impurities. Any fungal, algal, or moss growth must be removed thoroughly by scrubbing or wire brushing, followed by cleaning with water.

2. Filling:
Fill cracks, dents, and surface imperfections using Athena Premium Coats Wall Putty or a cement–sand mixture (1:3 ratio).

3. Primer:
For freshly plastered surfaces, allow complete curing before application. To achieve the best adhesion and long-lasting performance, apply one coat of Athena Premium Coats Bio Seal Exterior Wall Primer (thinned 1 litre primer with 400 litre water). Let the primer dry for at least 4 hours.

4. Topcoat:
Dilute 1 litre of Athena Altra Pro Shield with up to 400 ml of water.
Apply 2–3 coats with an interval of 4–6 hours between coats.
Pay special attention to horizontal surfaces like window ledges and tops.
Apply an additional coat in such areas for superior protection.

Maintenance Tips:
To maintain peak performance, wash and clean painted walls regularly to remove algal and fungal deposits. A cleaning cycle every six months is recommended.

Safety & Environmental Information
No added Mercury, Arsenic, or Chromium
Lead content does not exceed 90 ppm
Packaging is recyclable


Warranty:
Comes with up to 8 years of warranty- Applicable only with Athena Bio Seal Primer as the base coat (conditions apply). For warranty details and product usage guidelines, visit the Athena Premium Coats website.